Your microwave plate is what allows food to cook evenly on all sides. Therefore, if it stops spinning, you’re probably going to end up dealing with hot and cold spots in your meal. The good news is that Detroit Appliance, located in Fraser, MI, offers reliable microwave plate repairs, which will get your food back to its normal, consistent temperature.
Read on to discover why your microwave plate has stopped spinning. We’ll also provide details on what you can do to fix it.
Why Has the Microwave Turntable Stopped?
There are a number of reasons your microwave plate could have stopped spinning, ranging from an obstruction to a motor issue. The most common reasons include:
- Obstruction
- Incorrectly placed turntable
- Motor issue/malfunctioning motor
- Broken roller guide
- Faulty coupler
- Accidental disabling
Let’s look at each reason individually to determine why your microwave plate is not spinning. Also, if you discover your microwave has a broken or damaged part, be sure to reach out to the repair professionals at Detroit Appliance.
Is It an Obstruction?
Check the inside of your microwave for food particles or miscellaneous debris. Cleaning your microwave on a weekly basis is a good way to prevent this issue.
Is It Incorrectly Placed?
The turntable can occasionally become askew. Therefore, check your turntable’s placement to ensure it is properly seated.
Is There a Humming Sound?
Start your microwave and pay attention to any humming noises. If you hear humming and your turntable isn’t turning, this usually indicates you’ve got a motor issue. Please note that you’ll need to have food or water in your microwave to avoid overheating, which could lead to a fire.
Is It Malfunctioning?
Once again, start your microwave, and watch what’s happening. If everything else seems to work properly except for your microwave turntable, it could be experiencing a motor malfunction.
Is It a Broken Roller Guide?
The purpose of the roller guide is to allow your turntable to rotate. When it becomes dirty or damaged, it can hinder your turntable’s movement.
Is the Coupler Faulty?
Your coupler can become damaged by a manufacturer’s defect, improper use or excessive wear and tear. Due to the coupler connecting the turntable to the motor, your microwave will naturally stop moving if this is the problem.
Did You Accidentally Disable It?
Some microwaves give you the power to turn your plate on or off. If you’re not sure if this applies to you, grab your owner’s manual and find out. If it does, make sure you have the turntable turned on.
Microwave Turntable Stopped? Troubleshooting Tips
Follow along with our most common microwave plate troubleshooting tips. Each point listed below connects to one of the questions listed above.
- Cleaning the interior
- Cleaning the rotor guide
- Checking turntable placement
- Listening for humming sounds
- Inspecting the coupler
- Consulting your manual
- Calling an expert
Why Should You Call for a Professional Repair?
Although it may not seem like a big deal, it’s actually quite dangerous for you to attempt to repair your microwave turntable. In fact, one of the biggest dangers is getting an electrical shock from your microwave’s high-voltage capacitors. If you want to ensure an effective, safe repair, contact us today.
Complex Components
It might not occur to you how many complex components go into making your microwave’s plate turn. However, you’ll need to turn to a repair expert who has specialized tools and knowledge, due to the control board, switches, motor, etc.
Electrical Hazards
Even if your microwave is unplugged, it can still electrocute you. This is due to its high-voltage capacitors, which still hold a charge, even if they’re no longer connected to a power source.
You Could Cause Additional Damage
Proper training is a must before working on a microwave. Otherwise, it’s possible you’ll cause further damage, and you might even void your warranty.
Keep Things Safe
Our professional repair team in Fraser has the experience and training to greatly reduce the risk of electrocution. By calling us in, you can minimize your personal risk and get faster repairs.
Make Repairs More Effective
Finally, reaching out to our team is the right way to ensure an effective, safe repair. We will accurately diagnose the problem and take immediate steps to fix it.
Detroit Appliance Delivers Top-Notch Service
We’ve been assisting homeowners like yourself with appliance repairs in Metro Detroit since 2015. Our microwave repair services include turntable motors, electrical components, internal sensors, etc. Additionally, we take care of a wide range of other appliances such as oven and refrigerator repairs.
When Fraser-area microwave turntables stop working, contact the Detroit Appliance team for fast, accurate service.
